Step 2: connecting the audio cords, Select a connection – Sony DVP-NS700P User Manual
Page 20
20
Step 2: Connecting the Audio Cords
Refer to the chart below to select the connection that best suits your system. The surround effects
you will enjoy depend on the connections and components you use.
Select one of the following connections,
through
.
* Manufactured under license from Dolby Laboratories. “Dolby,” “Pro Logic,” and the double-D symbol are
trademarks of Dolby Laboratories. Confidential unpublished works. © 1992-1997 Dolby Laboratories. All rights
reserved.
** “DTS” is a registered trademark of Digital Theater Systems, Inc.
Select a connection
Connection
Components to be connected
N
TV (stereo)
N
Stereo amplifier (receiver)
(having L and R audio input jacks only, or having a digital input jack)
N
2 speakers
(front L and R)
N
MD deck/DAT deck
N
AV amplifier (receiver) with a Dolby
*
Surround (Pro Logic) decoder
(having L and R audio input jacks only, or having a digital input jack)
N
3 speakers
(front L and R, and rear (monaural))
N
6 speakers
(front L and R, center, rear L and R, and subwoofer)
N
AV amplifier (receiver) having a Dolby Digital or DTS
**
decoder and a digital
input jack
N
6 speakers
(front L and R, rear L and R, center, and subwoofer)
A
D
A
B
B
C
D