Shark NH130 - Manual (Page 5)

8 TOLL FREE: 1-800-798-7398 9 www.sharkclean.com
h
i
j
USING THE PORTABLE POWER VAC
1 While holding the Vacuum, press
the Power Button to begin cleaning.
(
fig. a)
NOTE: Always hold vacuum by the
Handle while pressing the Power
Button to turn on or off and during
use.
2 Make sure all the three wheels are
resting on a flat surface. This guides
the debris into the Inlet Opening.
(
fig. b)
NOTE: Because of the powerful
suction of the Vacuum, take care
when cleaning scatter-type rugs and
carpets with more delicate edges.
3 Empty Dust Cup after cleaning and
periodically during cleaning when
it appears full. (See “Maintenance”
section for instructions.)
USING THE PORTABLE POWER
VAC WITH FLEXIBLE HOSE AND
ACCESSORIES
For cleaning and dusting above-the-
ground and for hard-to-reach places.
4 Turn the Vacuum over and attach the
Hose Connector to the Inlet Opening
by aligning the arrows, pressing the
Connector down through the slots
(
fig. c) and then sliding it towards
the back of the unit ( fig. d) until you
hear it click into place.
a
b
5 Attach a cleaning tool to the other
end of the Hose:
• 2-in-1 Crevice/Dusting Tool ( fig. e)
NOTE: To convert the Crevice Tool
into a Dusting Tool, press the button
on the side and slide the nylon bristle
collar up.
• Pet Hair Power Brush ( fig. f)
• Long Reach Crevice Tool ( fig. g)
6 While holding the Vacuum by the
Handle, press Power Button to begin
cleaning.
7 Hold the vacuum by the Handle and
press the Power Button to turn off.
8 Remove the Flexible Hose and Hose
Connector from the Vacuum by
pressing and holding the release
button on the side of the Hose
Connector (
fig. h) while you slide
it toward the front of the Vacuum
(
fig. i) and lift out. (fig. j)
NOTE: Always remove the Hose
Connector before emptying Dust
Cup.
9 Empty Dust Cup after cleaning and
periodically during cleaning when
it appears full. (See “Maintenance”
section for instructions.)
10 When you are finished cleaning,
unplug the vacuum and remove
accessories. Store all accessories in
the storage bag and place in a cool
dry place for storage along with the
vacuum.
How to Use
e
f
g
Inlet
Opening
d
c