Savin C4535 User Manual
Page 56
Basic Procedure
45
2
E
Press the [OK] key.
F
Adjust the paper guides to the paper size.
1.
Horizontal size
2.
Vertical size
3.
Extender
4.
Paper guides
Note
❒ Make sure the paper size and direction in the bypass tray is displayed on
the operation panel.
❒ Make sure that the paper guides match the paper size. If the paper guides
are not adjusted to the paper size properly, paper might be skewed or pa-
per misfeed might occur.
❒ With large copy paper (more than A4L, 8
1
/
2
"
× 11"L), swing out the ex-
tender.
G
With the side you wish to copy onto face up, insert the paper into the by-
pass tray until it stops.
H
Set your originals, then press the
{{{{Start}}}} key.
Copying onto custom size paper with the bypass tray
Preparation
You can register custom paper sizes you use often in keys [Custom1],
[Custom2], and [Custom3] with the user tools.
⇒ P.135 “System settings”.
Note
❒ Be sure to set the paper size or a paper misfeed might occur.
A
Open the bypass tray.
B
Select one of desired paper types or settings with the
<
<
<
<>
>
>
> keys.
Trsh050e.eps