Recording from external equipment you are watching, Copying from a camcorder (dvd-r130, r131 only) – Samsung DVDR131 User Manual
Page 43

English -
43
R
ecording
5
Press the
REC
button
.
To pause recording
Press the
PLAY/PAUSE(
)
button to pause a
recording in progress.
●
Press the
PLAY/PAUSE(
)
button again to resume
recording.
●
You can switch channels by pressing the
PROG
(
/
)
buttons while recording pauses.
To stop recording
Press the
STOP
button to stop or finish a recording in
progress.
●
When using DVD-RW/DVD-R discs, the message
‘Updating the disc information.
Please wait for a moment.’ is displayed.
Recording from external
equipment you are
watching
Check that the disc has enough available space for the
recording. Adjust the recording mode.
1
Press the
OPEN/CLOSE
button, place a
recordable disc on the disc tray.
2
Press the
OPEN/CLOSE
button to close
the disc tray.
Wait until “LOAD” disappears from the front panel
display.
If an unused DVD-RW disc is used, whether to
initialize or not will be asked first. (See page 40)
3
Press the
INPUT SEL.
button to select the
input source according to the connection
you made.
The front panel display changes in the following
sequence: (DV input is display only DVD-R130, R131)
➞
PR Number
➞
AV1
➞
AV2
➞
AV3
➞
DV
If you connect a digital camcorder, press the
INPUT SEL.
button to select
DV
.
(See pages 43-44)
4
Press the
REC MODE
button repeatedly,
(or press the
REC MODE
button, then
press the …† button) to select the
recording speed(quality).
➞
SP
➞
LP
➞
EP
➞
XP
Before you start
■
You can not change the recording mode
while recording or Pause.
■
Recording will stop automatically if
there is no free space left for recording.
■
Up to 99 titles can be recorded onto a
disc.
■
Recording will stop automatically if a
copy protected image is selected.
■
DVD-RW discs must be
formatted before starting to record.
Most new discs are sold unformatted.
■
Do not use DVD-R authoring discs with
this DVD Recorder.
NOTE
Copying from a
Camcorder (DVD-R130,
R131 only)
You may control the Camcorder using the IEEE1394
(DV) interface.
Check that the disc has enough available space for
the recording. Adjust the recording mode.
1
Press the
OPEN/CLOSE
button, place a
recordable disc on the disc tray.
Before you start
Record Mode
SP (02:12)
01003A-R128,130-XEU_41~48 3/11/06 9:27 AM Page 43