Seagate SV35 SERIES ST3250824SV - Manual (Page 41)

SV35 Series SATA Product Manual, Rev. C 35
Note. Advanced Power Management (APM) and Automatic Acoustic Management (AAM) features are not supported
Note. See the bit descriptions below for words 63, 88, and 93 of the Identify Drive data.
83 Command sets supported 7C03
H
84 Command sets support extension 4003
H
85 Command sets enabled 30xx
H
86 Command sets enabled 0001
H
87 Command sets enable extension 4000
H
88 Ultra DMA support and current mode (see note following this table) xx3F
H
89 Security erase time 0000
H
90 Enhanced security erase time 0000
H
92 Master password revision code FFFE
H
93 Hardware reset value
(see description following this table)
xxxx
H
95–99 ATA-reserved 0000
H
100–103 Total number of user-addressable LBA sectors available (see Section
2.2 for related information). These words are required for drives that
support the 48-bit addressing feature. Maximum value:
0000FFFFFFFFFFFFh.
ST3500641SV = 976,773,168
ST3250824SV = 488,397,168
ST3160812SV = 312,581,808
104–127 ATA-reserved 0000
H
128 Security status 0001
H
129–159 Seagate-reserved xxxx
H
160–254 ATA-reserved 0000
H
255 Integrity word xxA5
H
Description (if bit is set to 1)
Bit Word 63
0 Multiword DMA mode 0 is supported.
1 Multiword DMA mode 1 is supported.
2 Multiword DMA mode 2 is supported.
8 Multiword DMA mode 0 is currently active.
9 Multiword DMA mode 1 is currently active.
Word Description Value