Sharp AQUOS LC-32DV28UT - Manual (Page 20)

18
Connecting an Audio Amplifier
■ When using coaxial cable:
It is possible to output audio through the DIGITAL AUDIO COAXIAL terminal.
1
2
3
6
DIGITAL AUDIO INPUT
COAXIAL
Rear of the TV
Coaxial cable
(Illustration is LC-26DV28UT.)
■ When using audio cable:
This connection allows you to use an audio amplifier and external speakers, and adjust the audio level using the TV’s remote
control. (See page 28.)
1
2
3
6
ANALOG AUDIO IN ANALOG AUDIO IN
Rear of the TV
Audio cable
AUDIO-R (Red)
(Illustration is LC-26DV28UT.)
AUDIO-L (White)
Connecting a PC
■ When using HDMI cable (INPUT 4 or 5):
1
2
3
6
HDMI OUT HDMI OUT
HDMI-certified cable
(Illustration is LC-26DV28UT.)
Rear of the TV
NOTE
Depending on the board, only video signals may be output. In this case, in addition to connecting an HDMI-certified cable
to the INPUT 4 (HDMI1) terminal, connect an audio cable to the AUDIO PC/HDMI terminal and set “HDMI1 Audio” to “DVI”.
(See page 28.)
The HDMI terminals only support digital signal.
•
•
Connecting to External Equipment
54P0331A.indb 18 54P0331A.indb 18 19/4/2553 10:24:38 19/4/2553 10:24:38