Sharp electronic cash register XE-A20S - Manual (Page 63)

61
OVERRIDE ENTRIES
Programmed limit for functions (such as for maximum amounts) can be overridden by making an entry in the
MGR mode.
On this example, the register has been programmed not to allow
discounts entries over $1.00.
REG-mode 1500 #
entries 250 -
...Error
l
Turn the mode switch
to the MGR position.
250 -
Return the mode switch
to the REG position.
A
Print Key operation example
REG
OPX/Z MGR
PGM
X1/Z1
X2/Z2
OFF
VOID
1. Turn the mode switch to the MGR position.
2. Make an override entry.
CORRECTION AFTER FINALIZING A
TRANSACTION (Void mode)
When you need to void incorrect entries that clerks cannot correct (incorrect entries found after finalizing a
transaction or cannot be corrected by direct or indirect void), follow this procedure:
1. Turn the mode switch to the VOID position using the manager key (MA), to enter
into the void mode.
2. Repeat the entries that are recorded on an incorrect receipt. (All data for the
incorrect receipt are removed from register memory; the voided amounts are
added to the void-mode transaction totalizer.)
Cancellation receipt Incorrect receipt
REG
OPX/Z MGR
PGM
X1/Z1
X2/Z2
OFF
VOID