Siemens 383V FA - Manual (Page 21)

Colour monitor 383V FA
A26361-K873-Z100-2-5E19 English - 13
Adjusting the contrast
Calling the CONTRAST setting window
Use the - button to reduce the contrast. Use the + button to increase the contrast.
Setting the contrast automatically to an optimal value
Activating the AUTO-CONTRAST function
The contrast is automatically set to an optimal value.
Selecting input signal
Selecting input signal ( INPUT ANALOG/DIGITAL )
The monitor can be operated with analogue or digital signals. With this function you can
(depending on the graphics card you use) switch over between the analogue and the
digital mode.
Adjusting the brightness
Calling the BRIGHTNESS setting window
Use the - button to reduce the brightness. Use the + button to increase the brightness.
Adjusting the colours
Calling the COLOR submenu
Set one of the preset colour temperatures ( PRESET 1 or PRESET 2 ).
Increase or decrease red ratio
Use the - button to increase the red ratio. Use the + button to decrease the red
ratio.
Increase or decrease green ratio
Use the - button to increase the green ratio. Use the + button to decrease the
green ratio.
Increase or decrease blue ratio
Use the - button to decrease the blue ratio. Use the + button to increase the
blue ratio.