Siemens 383V FA - Manual (Page 19)

Colour monitor 383V FA
A26361-K873-Z100-2-5E19 English - 11
Monitor settings with the buttons of the control panel
2 1
AUTO MENU - +
3
1 = Buttons for the OSD menu
(On-Screen-Display) 2 = Power button
3 = Power indicator
Use the buttons of the control panel to make the following monitor settings directly while the OSD
menu is switched off.
Selecting input signal
The monitor can be operated with analogue or digital signals. You can switch between the analogue
and the digital mode (depending on the graphics card you use).
Ê Press the - button to change the mode of the input signal.
Setting the contrast automatically to an optimal value
Ê Press the + button to activate the AUTO-CONTRAST function.
Automatically adjusting image display
Ê Press the AUTO button to activate the AUTO-SYNC function.
Monitor settings using the OSD menu
You can use the buttons on the control panel to set the screen display via an integrated OSD menu
(On-Screen-Display).
i
The OSD menu is available in different languages. The English menu names are used in
the following description (default setting). You can select another language with the OSD
function
LANGUAGE .