Speco Technologies 4 - Manual (Page 69)

69
7-7-2. Record
Select RECORD tab to set the recording conditions.
These settings apply to the specified channel only.
1. Recording Setup
- Resolution: Sets the resolution for the recordings. The set value applies to an individual channel.
- Frame Rate: Sets the recording rate.
- Quality: Sets the image quality in 5 levels.
- Recording: Sets the recording mode.
- Recording Mode: CONTINUOS, SCHEDULE, MOTION
- Pre Record: Sets whether to perform or not pre recording.
- Post Event Record: Sets the duration of the event recording.
- Audio: Sets whether to perform or not audio recording.
These settings apply to all channels.
2. EZRECORD
- Resolution: Sets the resolution for the recordings. The set value applies to an individual channel.
- Frame Rate: Sets the recording rate.
- Quality: Sets the image quality in 5 levels.
- Recording Mode: Sets the recording mode.
- RECORD Days: By the setting value, the Recording Days will change accordingly.