Speco Technologies 4 - Manual (Page 46)

46
5-1-1. PTZ Control
Table 5.1.3. Menu Items in PTZ Control Window
Item Description
INITIALIZE Initialize the PTZ settings of the selected camera
PAN/TILT Select PAN/TILT using the ▲▼◀ and ▶button,
then
press SEL. Adjust the tilt (UP/DOWN)/pan
(LEFT/RIGHT) position using the ▲▼◀and ▶
buttons.
ZOOM/FOCUS Select ZOM/FOCUS using the▲▼◀ and ▶
buttons, then press SEL. Adjust the zoom
(UP/DOWN)/ focus (LEFT/
RIGHT)position using the ▲▼◀ and ▶ buttons.
OSD Select OSD to enter the menu. Control keys are
Right, Left, UP, Down, Select, Far (REW KEY), and
Near (FF KEY). Press the ESC button to return to
the previous menu. Press the PTZ button to close
the OSD menu.
AUTOSCAN Press the right key(▶) to start auto scan. Press the
left key (◀) to stop auto scan.
PRESET Select PRESET, then press the left key(◀). A
number input window will appear. Set the number
(3digits) using the number key, then press the SEL
to confirm the preset number for the current position.
Press the right key (▶) and enter the number
(3digits) to go to the preset position.
TOUR Select TOU and press the right (▶) key. A number
input window will open. Select a number (1digit)
using a number key, then press SEL to start the tour.
Press the left (◀) key to stop the tour.
Preset the number of the tour group in the OSD
menu.
NUMBER For the TOUR and PRESET menu.
Press ESC to return to the main menu