Sanyo VPC-HD1000 - Manual (Page 8)

7
CHARGING THE BATTERY PACK
3
Replace the battery cover.
pack...>
h Raise the edge of the battery
pack to remove it.
4
Close the camera’s monitor
unit, and set the camera in the
docking station.
h Set the camera securely,
making sure that the camera
is correctly oriented in relation
to the terminal contacts in the
docking station.
h Charging begins when the
camera is set in the docking
station.
h During charging, the multi-
indicator is lit red. When
charging is completed, the
charge indicator turns off.
h If the charge indicator flashes
red, it indicates that the
battery pack is defective or
the camera is not correctly set
in the docking station. Reset
the camera correctly in the
docking station.
h The charging time is approx.
250 minutes.
Multi-indicator
Docking station terminal
DC IN terminal
To AC
adaptor