Sony Ericsson GC75 - Manual (Page 4)

4 English
on screen instructions. When
installation is complete click Finish.
Note: The Wireless Manager is installed
in the same language as your
Windows installation, or English if
your Windows language is not
available.
3. Fully insert the GC75 into your laptop
PC. A beep signals that your laptop
has recognised it.
4. After a few seconds the New
Hardware wizard opens and the
necessary drivers for the GC75 are
installed from the Wireless Manager
CD.
5. The GC75 and the Wireless Manager
software are now installed and ready
for use. Select Programs
Sony
Ericsson Wireless Manager to
open the Wireless Manager.
6. Enter your SIM Card PIN, if
requested. Click OK.
7. Wireless Manager opens. After a
short delay your signal strength and
Network Operator are displayed in the
Status screen.
Create a connection
1. From Wireless Manager select .
2. Check the box next to Create a new
connection, enter a name for the
new connection, for example ‘My
Connection’, and click Next.
3. Select the type of data connection you
require. Choose from:
• GPRS (General Packet Radio
Service)
• CSD/HSCSD (Circuit Switched
Data/High Speed Circuit Switched
Data)
4. Select your Network Operator from
the drop down list at the bottom of the
screen. If your Network Operator is
not listed select . Click Next.
3
Creating a connection
GC75_QSG_P1B.BOOK Page 4 Friday, July 30, 2004 8:54 AM