Granite180.6 – Soundstream Technologies Granite 120.4 User Manual
Page 6
GRANITE180.6
1.
Connected to fuse or circuit breaker, then battery’s positive post.
2. Ground Main ground connection. Bolt to a clean chassis ground in the vehicle.
3. Remote Remote turn-on input from the head unit. Accepts
4. LED Indicates amplifier power on.
5. Speaker Output Connections Channels
(1
2
6. Input Level Variable from
to
(Channels 1 + 2).
7. Inputs Standard RCA-type connectors (Channels
1 +
2). Use only right channel for mono.
8. Speaker Output Connections (Channels 3 + 4)
9. input
Variable from
to
(Channels 3 + 4).
10. Inputs Standard RCA-type connectors (Channels 3
Use only right channel for mono.
11. Speaker Output Connections (Channels 5 + 6)
12. Input Level -Variable from
to
(Channels 5 + 6).
13. Inputs Standard
connectors (Channels 5
Use only right channel for mono.
14.
[underside]
Channels 5 + 6 Mono/Stereo (input 5 + 6) Stereo (input 3 + 4) Switch
MONO position for single channel operation. (Only right channel is active in Mono) Use
“STEREO
for RCA inputs
Use “STEREO
for input from
15. [underside] Channels 5 + 6 Crossover Full range or high pass
16. [underside] Channels 3 + 4 Mono/Stereo (input 3 + 4) Stereo (Input 3 + 4) Switch
MONO position for single channel operation. (Only right channel is active in Mono) Use
either STEREO input position with RCA inputs from Channels 3 + 4.
17.
3 + 4 Crossover Full range or high pass
18. [underside] Channels + 2 Mono/Stereo (input
2) Stereo (input 3 + 4) Switch
MONO position for single channel operation (only right channel is active in Mono). Use
“STEREO
for RCA inputs
Use ‘STEREO
for input from
19.
1 +
2 Crossover Full range or low pass
20.
[underside]
Main Fuse Main power supply fuse, replace only with same value.
5