Soundstream Technologies Granite 120.4 - Manual (Page 5)

GRANIlE120.4
1 5 ’
6
‘ 7
Side View
1 2
MONO MONO STEREO
Right
1 5
L-J
Underside
1. Connected to fuse or circuit breaker, then battery’s positive post.
2. Ground Main ground connection. Bolt to a clean chassis ground in the vehicle.
3. Remote Remote turn-on input from the head unit. Accepts
4. LED indicates amplifier power on.
5. Speaker
Connections Channels 2
6.
Input Level Variable from
to (Channels 2).
7.
Inputs Standard RCA style connectors (Channels
2). Right channel only for mono.
8. Speaker (Channels 3 + 4)
9.
Input Level -Variable from
to (Channels 3 + 4).
10.
Inputs Standard RCA style connectors (Channels 3 + 4). Right channel only for mono.
11. 3 + 4 (input 3 +
(input 3 + 4) Switch
MONO position for single channel operation (only right channel is active in Mono). Use
either STEREO input position with RCA inputs from Channels 3 + 4.
12. [underside]
Channels 3 + 4
Select either full range or high pass
operation.
13. [underside]
Channels
2
Mono/Stereo (input
2)
Stereo (input 3 + 4)
MONO position for single channel operation (only right channel is active in Mono). Use
“STEREO
for RCA inputs Use “STEREO for RCA input
14. [underside]
Channels 1 + 2 Crossover Select either full range or low pass
operation.
15. [underside]
Main Fuse Main power supply fuse, replace only with same value.
4