Sony UP20 - Manual (Page 38)

A
d
jus
tment
Functions That Can be Set on Menus
38
Adjustment
Functions That Can be
Set on Menus
You can set up the printer to meet various specifications.
Once you have adjusted and stored the settings, the
printer operates according to those settings until their
values are modified. You can set up the printer according
to its intended purpose, connected equipment, or your
individual preferences.
You can store up to three settings as a set of user settings,
called user set 1, 2 and 3.
Functions that can be set on those menus are as follows:
a) Only for the UP-21MD
Menu Functions to be set Reference
pages
COLOR
ADJUST Adjusting the printout color
(color intensity and
contrast) and sharpness 45
LAYOUT
SETUP Selecting the memory mode 24
Selecting the type of
printout 25
Selecting whether or not
white borders are added to
multiple reduced images 30
WINDOW
SETUP Eliminating the black lines
produced on the printout 47
CAPTION Entering a caption 31
PRINTER
SETUP Setting the print quantity 20
Adjusting the tone of the
printout 47
Selecting the print speed 19
Confirming whether or not
the memory image is
blurred 29
COLOR
BALANCE Adjusting the color balance 48
SYSTEM SETUP Adjusting the brightness of
the printer window
display
a)
53
Setting the baud rate for
computer communication 54
Selecting whether or not the
operation and error tones
sound 53
Compensating for the level
of the input signal 43
Registering user settings 54
USER NAME Editing the user name 54
FUNCTION
SETUP Selecting the image which
appears after storing the
image into memory, the
source image or the
memory image 27
Selecting the timing of the
pulse signal input to the
REMOTE 2 connector 52
Assigning the function to
remote control units
connected to the REMOTE
2 connector 52
Setting the function of the
CLEAR button 35
INPUT SETUP Selecting the input signal 15
Compensating for the input
signals 43
OUTPUT SETUP Erasing the screen display 36
Matching the video monitor
color to the printout color 44
Selecting the output signal
from the printer 44
Selecting whether the
printer synchronizes with
the internal sync signal
included in channel G of
the RGB signals
a)
11
Selecting whether or not
information about the ink
ribbon is displayed 54
Menu Functions to be set Reference
pages