Sony PCWA-A100 - Manual (Page 13)

13
z Tip
You may also connect computers to the Access Point via a hub. Use the
10BASE-T connector to build a wired LAN environment in addition to a
wireless LAN environment. This makes file sharing available among wireless
and wired LAN clients.
Notes
• Category 5 Ethernet cable is recommended or you may not be able to
attach the unit stand to the Access Point.
• To connect a hub to the 10BASE-T connector on the Access Point, use a
straight-through Ethernet cable (same order color code when side by side).
• To connect a computer directly to the 10BASE-T connector on the Access
Point, use a crossover Ethernet cable (reverse order color code when side
by side).
2
Connect the AC power adapter (page 17).
Internet
Internet
Service
Provider
HUB
To 10BASE-T
connector
To LINE/
PHONE
connector