Reject call, Handsfree, Swapping between 2 calls b – Siemens PEGASUS-DTC AX72 User Manual
Page 11: Conference b, Direct call, Text entry, Text entry without t9, Swapping between 2 calls, Conference
11
Text entry
right page (11)
of AX72 Pegasus-DTC, FUG, en, A31008-H2860-A1-1-7619 (06.10.2005, 08:28)
©
Sie
m
en
s A
G
200
3,
C:\D
at
en
_itl\S
iem
en
s\D
TP-S
atz\Pr
odukt
e\A
X
72_Pegasus_
D
TC\out-
VA
R Language:
en; V
A
R is
sue dat
e: 05
0613
A phone number transmitted by the net-
work is displayed or the corresponding
name if it is contained in the Phonebook
(p. 14) or Addressbook (p. 15). A picture
may also appear (settings p. 15).
Reject call
§Reject§
or
B
press briefly.
Handsfree
You can put the phone aside during a call.
You can then hear the caller via the
loudspeaker.
Activate handsfree function with
§Handsfr.§
and switch on with
§Yes§
.
Adjust the volume with
E
. Pressing
§Handsfr.§
switches off "handsfree talking".
Always switch off "handsfree talking" before
holding the phone to your ear! This will avoid
damage to your hearing!
Swapping between 2 calls
b
Make a new connection during a call with
y menu§
¢
Hold
¢
J
(dial a new phone
number). With
y menu§
¢
Swap
you can
swap back and forth between both calls.
If you are called during a phone call and
you can hear the "call waiting tone"
(p. 23), you can accept the waiting call
with
§Swap§
,putting the current call on
hold to do so.
Swap back and forth between the calls
see above or end the current call with
B
and accept the new call with
§Answer§
.
Conference
b
Call up to 5 parties and link them togeth-
er in a conference call. Make a new con-
nection during a call with
y menu§
¢
Hold
¢
J
(dial a new phone number).
The current call is set on hold. With
y
menu§
¢
Conference
you can join the held
call when the connection is established.
Repeat this procedure until all partici-
pants are linked together.
All
calls in the conference are ended si-
multaneously when the End key
B
is
pressed.
Direct call
If this is active, only one number can be
dialled.
§Menu§
¢
m
¢
Security
¢
Direct call
Press
D
and enter phone code. The
phone code (4- to 8-digits) is set by you
and entered at the first security setting.
Please note this code down
Confirm code input with
§OK§
. Press
§Change§
and enter number (press
·
to
select phone number from the Adress-
book p. 15 or Phonebook p. 14). Confirm
"On" with
§OK§
.
To dial, press and hold the right soft key.
To switch direct call off, press and hold .
Enter phone code and confirm with
§OK§
.
Press
§Change§
and Confirm
Off
with
§OK§
.
Text entry
Text entry without T9
Press number key repeatedly until the re-
quired letter appears. After a brief interval
the cursor will advance. Example:
2
Press once briefly to type the let-
ter a, twice to type b, etc. Press
and hold to write the number.
Д,д,1-9
Umlauts and numbers are dis-
played after the relevant letters.