Selecting a switch, Changing a switch setting, Printing the current switch settings – Star Micronics LC-8021 User Manual

Page 27: Exiting the eds mode

Selecting a switch

❏

While in the EDS Mode (EDS-1 or EDS-2), use the control panel’s

EJECT

button to select a bank switch. While the

DATA

indicator is off, the lit

indicator indicates the currently selected switch.

Changing a switch setting

❏

After selecting a bank and switch, press the control panel’s

button to

turn the switch on and off. The current setting of the switch is shown by the

POWER

indicator: the indicator is lit when the switch is on, and is not lit

when the switch is off.

Printing the current switch settings

❏

In the EDS Mode, hold down the control panel’s

ON LINE

button, and then

press the

button to print the current EDS settings. Asterisks on the

printout show whether a switch is turned on or off.

Exiting the EDS Mode

❏

To save EDS settings you have made and exit the EDS Mode, press the

LINE

Lit Indicator

Selected Switch

MULTI-PART

MULTI-PART + EJECT

EJECT

EJECT + LF

LF + ON LINE