Star Micronics LC-8021 - Manual (Page 15)

Connecting to a power outlet and turning power on and off 9
Important!
Never try to move the print head while the printer is plugged into a power
outlet. Doing so can damage the printer. If you have just used the printer, let
the print head cool for a few minutes before you touch it.
❏
Pull on the ribbon guide below the print head to detach it.
❏
Pull on the top of the ribbon cartridge and then carefully lift up the
cartridge to remove it from the printer.
❏
Use the procedure under “Removing the protective materials” on page 5 to
install a new cartridge.
Connecting to a power outlet and turning power on and off
❏
Make sure the power switch on the front of the printer is in the OFF
position (O).
ON
OFF