Sirius Satellite Radio SRH2000 - Manual (Page 21)

21
7 Route the cable from the antenna location to the interior of the
home, working the cable through the basement, under a window
sill, etc ., and make adjustments and take up slack whenever
necessary .
8 Plug the antenna cable into the ANTENNA connector on the back
of the Tuner .
9 Plug the Tuner into a 110VAC wall receptacle . The front panel
STANDBY LED will light red .
10 You are now ready to activate and enjoy SIRIUS programming
within your home .
Testing Antenna Signal Strength
The stronger the signal strength, the less likely it is that you will experience
an interruption of the audio . In the menu options of the Tuner, there is
an signal indicator display which shows two bar graphs indicating signal
strength . (Refer to “Signal Indicator” on page 85 .) This can be a useful tool for
positioning the antenna in an optimal location for maximum signal reception .
Activating Your SIRIUS Subscription
Before you can listen to the SIRIUS service, you must subscribe to the SIRIUS
XM Radio service .
1 Make sure that the Tuner is properly connected and that its
antenna is oriented to receive the SIRIUS satellite signal .