StorCase Technology DE100i-SWC - Manual (Page 15)

StorCase Technology, Inc. DE100i-SW/SWC User's Guide - Rev. G01
8 Installation
Drive Carrier
Disk Drive
(Not Included)
I/O Cable
Drive Mounting
Hardware (4ea)
Phillips # 6-32 x
3/16 Flat HD
0151j
Cable
Cover
(Provided)
Cable Cover
Screws (2 plcs)
# 6-32 x 3/16
Flat HD
Installation
(DE100i-SWC only)
1. Attach the I/O cable from the rear distribution board of the DE100i-SWC carrier
to the disk drive (Figure 6B).
2. Carefully insert the drive into the carrier at an angle, cable-end first. Make sure
not to pinch the cable. Lower the front of the drive carefully into place.
Fasten the drive into the carrier with four (4) #6-32 Phillips Flat Hd. screws
provided.
5. Attach the provided cable cover with two (2) #6-32 Phillips Flat Hd. screws.
Figure 6B: Drive Installation Assembly
(DE100i-SWC)