Connecting to an external source, Connecting the fm aerial, Connecting to an external source 1 2 3 – Samsung MM-C330 User Manual
Page 9
ENG
9
How to connect a COAXIAL TYPE aerial.
Connect a antenna to the FM antenna terminal.
Plug the connector on the FM aerial supplied into the coaxial socket marked
FM
on the rear of the system.
Follow the instructions given on Page 16 to tune into a radio station, and
determine the best position for the aerial.
If reception is poor, you may need to install an outdoor aerial.
To do so, connect an outdoor FM aerial to the FM socket on the rear of the
system using a coaxial cable (not supplied).
Connecting the FM Aerial
8
8
The auxiliary input can be used to take advantage of the sound quality
of your micro-compact system when listening to other sources.
Examples: A television
A DVD player
A VCR
To connect to the external source, the source must have an audio
output. In addition, you need an connection cable.
Set the system to standby mode and disconnect it and the external
source from the main socket.
Connect the audio cable to the rear of the micro component system.
Be sure to match connector colors.
Plug the system back into the main socket and press
POWER to switch it on.
Select the AUX source by pressing AUX.
Result: AUX is displayed.
Switch the external source on.
Adjust the volume and balance as required:
Volume
Equalizer
Example: You can watch a film and take advantage of stereo sound
provided that the original sound track is in stereo (as if you were
in a cinema).
Connecting to an External Source
1
2
3
8
4
5
6
2
4
3
MM-C330-XAC-ENG- Mic.indd 9
MM-C330-XAC-ENG- Mic.indd 9
2010-6-29 8:36:22
2010-6-29 8:36:22