Samsung TXN 3275HF - Manual (Page 11)

C HAPTER O NE : Y OUR N EW TV 1.5
Remote Control
You can use the remote control up to about 23 feet from the TV. When using the remote,
always point it directly at the TV.
You can also use your remote control to operate your VCR and cable box. See page 4.1
for details.
ΠPOWER
Turns the TV on and off.
´ Number buttons
Press to select channels directly
on the TV.
+100
Press to select channels over 100.
For example, to select
channel 121, press “+100,” then
press “2” and “1.”
ˇ DISPLAY
Press to see the time, channel,
etc., on-screen. Also press to exit
(quit) the menu system.
¨ P.SIZE
Press to change the screen size.
Your choices are Normal, Zoom1,
Zoom2 or Wide screen.
ˆ RESET
If your remote control is not func-
tioning properly, take out the bat-
teries and press the reset button
for about 2~3 seconds. Re-insert
the batteries and try using the
remote control again.
Ø MTS (Multichannel
Television Stereo)
Press to choose stereo, mono or
Separate Audio Program (SAP
broadcast).
∏ ADD/ERASE
Press to add or erase channels in
the TV’s memory.
” TV/COMPONENT
Press to switch the TV, COMPO-
NENT1 or 2 mode.
’ CH▲ and CH▼
(Channel Up/Down)
Press CH▲ or CH▼ to change
channels(Also used to highlight
selections on the on-screen
menus).
˝ MUTE
Press to temporarily cut off
the sound.
Ô MODE
Selects a target device to be con-
trolled by the Samsung remote
control (i.e., TV, VCR, Cable box, or
DVD).
 SET
Use this button when you are set-
ting up your remote control to
operate your VCR, Cable box, or
DVD).
Ò P.MODE
Adjust the TV picture by selecting
one of the preset factory settings
(or select your personal, cus-
tomized picture settings).
Ú S.MODE
Adjust the TV sound by selecting
one of the preset factory settings
(or select your personal, cus-
tomized sound settings).
Æ PRE-CH
Tunes to the previous channel.
ı R.SURF
Press the R.SURF button to auto-
matically return to a preferred
channel after a user-preset time
delay.
˜ TV/VIDEO
Press to display all of the
available video sources (i.e., AV1,
AV2, AV3, S-VIDEO).
¯ VOL - , VOL +
Press to increase or decrease the
volume(Also used to make selec-
tions on the on-screen menus).
˘ MENU
Displays the main on-screen
menu.
¿ STILL(Main)
Press to stop the action during a
particular scene. Press again to
resume normal video.
Note: The still function doesn’t
operate in Component1, 2 mode. TXN2771HF/TXN3071WHF/TXN3271HF
TXN2775HF/TXN3075WHF/TXN3275HF
TXN2670WHF
Y
O U R
N
E W
T V