Sony RM-AV2000T User Manual

Page 37

Text mode
Original mode

Symptom

A system control
program does not
function correctly.

The power of the
Commander turns off by
itself.

Remedy

• Make sure that you have programmed the commands in the correct

order. (page 18)

• Try changing the orientation of the Commander. If that does not help,

try placing the components as close to each other as possible.

• Check the status of the components and make sure that you have set the

components properly to receive commands from the SYSTEM
CONTROL buttons.

• This Commander is preset at the factory to switch the power off

automatically after 10 minutes if left unused. (Auto Power-Off, page 32)
You can change the power-off time from 10 to 90 minutes, or set the
Commander not to power off automatically.

Troubleshooting (continued)