Sanyo VPC-CG20 - Manual (Page 21)

English
12
SE
TU
P
INSTALLING THE CARD
Be sure to format a newly purchased card or one that was used in another
device before using it in your camera (page 13). If an unformatted card is
used, the card itself may become unusable.
h To remove the card, press it in, and then release. The card will
protrude slightly, and you can then pull it out.
4 Close
3 Insert the card
Card slot cover
2 Swivel
1 Raise up
1 Push the card in
2 Pull it out