Sanyo SC-150 - Manual (Page 6)

ASSEMBLING THE VACUUM CLEANER
Caution: Do not connect the power plug to the wall socket until assembly is
completed.
5
Caution: Do not lift or carry the vacuum cleaner by the hose or extension pipes. There is a hazard if
the hose or extension pipes become detached.
Be careful not to sandwich the electrical cord between the pipe and the main unit when
inserting the holding latch into the latch slot.
3
1 2
4
5
Insert the hose into the main
unit.
Click into place
Button
Ring
Floor nozzle slot
Floor nozzle
mount
Floor nozzle
mount Hose holder
Button
Holding
latch
Latch slot
Button
Pull while pressing button.
Fit the floor nozzle slot onto the
floor nozzle mount.
Hook the hose holder onto the
hose holder mount
Attach the extension pipes and the
floor nozzle as shown.
Match the imprinted numbers as
shown.
Rotate the rings in the direction shown by
the arrows and pull pipes apart.
Set the holding latch into the
latch slot.
Slide the button in
the direction shown
by the arrow.
REMOVAL
REMOVAL
REMOVAL
1
1
1
2
2
2
1 1
2 2
3 3