11 starting your camera, Camera mode – Sakar Digital Concepts 57483 User Manual

Page 11

Starting Your Camera

Press and hold the On/Off

button for 2 seconds to start the camera. The LCD screen will light up and the camera will sound a “beep”. This will

confirm that your camera is on and ready for use.

Camera Mode

Set the mode dial to Camera Mode – the

icon will appear on your LCD screen.

Taking Photos

You can compose your shot using either LCD screen or the view finder. Hold

the camera steady and press the shutter button to take photo. There will

be a short delay while the camera saves the photo to memory.

After each photo is shot (when the camera returns to icon mode) the numbers of photos left to shoot at this resolution is displayed at the top left of the
LCD screen.

When the camera's memory (photo capacity) is full, the LCD screen will display “0”. If you attempt to take a photo when the memory is full the camera
will beep continuously. Please insert a SD memory card to transfer and take more photos.

Digital Zoom

You can magnify your subject up to 4 times using the digital zoom. Use the

and

buttons to adjust the zoom. The

icon will flash on your

LCD screen. Push the

button to zoom in on your subject. Push the

button to zoom back out.

Display

The default display setting shows icons on the LCD screen. Press the

display button once to switch off the icons. Press the

button again to

switch off the LCD (to conserve battery power).

Pressing the

display button repeatedly toggles between these display modes.

This manual is related to the following products:

57482