Woodstock SHOP FOX W1754S - Manual (Page 24)

-10-
W1754 20" Planer With Mobile Base
SE
T
U
P
Figure 4. Example of planer being lifted
using forklift.
MAKE your shop “child safe." Ensure
that your workplace is inaccessible to
youngsters by closing and locking all
entrances when you are away. NEVER
allow untrained visitors in your shop
when assembling, adjusting or operat-
ing equipment.
The cabinet stand on the Model W1754 is equipped with
lifting bars to lift and place the planer.
Before lifting the planer, remove the shipping brace. We
recommend placing shop rags or cardboard between the
forks and cabinet base so you do not scratch the paint.
Figure 4 shows an example of a typical planer being lifted
correctly with a forklift by the lifting bars.
• Floor Load: This machine distributes a heavy load in
a small footprint. Some floors may require additional
bracing to support both machine and operator.
• Working Clearances: Consider existing and
anticipated needs, size of material to be processed
through the machine, and space for auxiliary stands,
work tables or other machinery when establishing a
location for your planer.
• Lighting: Lighting should be bright enough to
eliminate shadow and prevent eye strain.
Machine Placement
Lifting Planer
USE power lifting equipment to
lift this planer. Otherwise, seri-
ous personal injury may occur.
Hardware and Tools (Not Shown)
• Hex Wrenches 3, 4, 5, 6mm .............................4
• Wrenches 8/10, 12/14, 17/19mm ......................3
• Set Screws M8-1.25 x 20 (Wings) ........................6
• Hex Bolts M8-1.25 x 35 (Wings) .........................6
• Flat Washers 8mm (Wings) ...............................6
• Lock Washers 6mm (Wings) ..............................6
• Handwheel Bushing (Handwheel) .......................1
• Handwheel Handle (Handwheel) ........................1
• Hex Nut M12-1.75 (Handwheel) ........................ 1
• Flat Washer 12mm (Handwheel) ........................1
• Key 4 x 4 x 20mm (Handwheel) .........................1
• Flange Bolts M6-1 x 12 (Dust Hood) ....................6