Sharp Aquos LC 10A3U - Manual (Page 25)

25
SETUP (Continued)
■ Saving broadcast TV channels into memory.
1.1 Press MENU to display the MENU
screen, then press CH (])/([) to
move the “ > ” mark to “SET UP”.
1.2 Press VOL (+)/(–) to display
SETUP mode, then press CH (])/
([) to move the “ > ” mark to “CH
SETTING”.
1.3 Press VOL (+)/(–) to display CH
SETTING screen.
1.4 Press CH (])/([) to move the “ > ”
mark to “CH SEARCH”, then press
VOL (+)/(–) to display CH SEARCH
screen.
START
2.1 Press VOL (+) . The tuner will
search through all available chan-
nels in your area and add them into
the TV’s memory.
STOP
2.2 Press VOL (–) . CH SEARCH will
stop at the current channel and will
not add any higher channels.
2.3 Press MENU to exit.
■ Adding weak or additional channels or erasing unwanted channels from TV
memory.
1.1 Press MENU to display the MENU
screen, then press CH (])/([) to
move the “ > ” mark to “SETUP”.
1.2 Press VOL (+)/(–) to display
SETUP mode, then press CH (])/
([) to move the “ > ” mark to “CH
SETTING”.
1.3 Press VOL (+)/(–) to display CH
SETTING mode, then press CH
(])/([) to move the “ > ” mark to
“CH MEMORY”.
2.1 Press VOL (+)/(–) to display CH
MEMORY.
2.2 Use CH (])/([) or CHANNEL
SELECT to select each desired
channel to add or erase.
2.3 Press VOL (+) to add a channel to
the TV’s memory or press VOL (–)
to erase a channel from the TV’s
memory.
2.4 Press MENU to exit.
Note:
■ If you press VOL (+) again while in the CH SEARCH mode, auto-program will start again, and the previously
memorized channels will be lost.
POWER
TV/VIDEO
CH
CH
8 9
0
DISPLAY
1 2 3
4 5 6
7
MENU
MUTE
FLASHBACK
MENU
CHANNEL
SELECT
VOL (+)/
(–)
CH (])/
([)
ADJUSTMENT (Continued)
(CH SETTING mode)
(CH SEARCH mode)
(CH SETTING mode)
VOL (+)
to add channel 12
to the TV memory
VOL (–)
to erase channel 12
to the TV memory