Sharp Aquos LC 10A3U - Manual (Page 18)

18
EZ SETUP DURING FIRST POWER ON
■
When you turn on the LCD TV for the first time, it will automatically memorize the broadcasting
channels.
Please perform the following instructions before you press the power button.
(1) Insert the batteries into the remote control. (See page 8)
(2) Connect the antenna cable to the TV set. (See page 9 ~ 10)
(3) Plug in the AC adapter to the wall outlet.
1
Slide the MAIN POWER switch on
the LCD TV set or press POWER
on the Remote Control to turn on
the LCD TV. The SELECT LAN-
GUAGE mode will be displayed.
2
Press CH (])/([) to select
“ENGLISH”, “SPANISH
(ESPAÑOL)” or “FRENCH
(FRANÇAIS)”.
3
Press VOL (+)/(–) to display EZ
SETUP mode.
4
Press VOL (+) .
The tuner will automatically search
for the broadcasting and cable TV
channels. (The CH No. will auto-
matically increase when it ap-
pears.)
If you want to stop the EZ SETUP
process once it has started, press
VOL (–) and it will be canceled.
If you want to SETUP again,
please refer to page 22 on SETUP.
Press
VOL (–) to cancel EZ
SETUP.
5
Once EZ SETUP is completed, the
smallest channel number memo-
rized will be displayed.
Notes:
■ If EZ SETUP does not memorize all the channels in your region, please refer to page 24 for more information on
manual memorizing the channels using CHANNEL SETTING.
■ It may be difficult to PRESET when the broadcasting signals are weak, the channel cycle frequency is incorrect or
the frequency jamming is occuring around the area. Please refer to pages 24 ~ 25 for more information on manual
memorizing the channels using CHANNEL SETTING.
MAIN POWER CH VOL TV/VIDEO
POWER
TV/VIDEO
CH
CH
8 9
0
DISPLAY
LCDTV
1 2 3
4 5 6
7
MENU
FLASHBACK
MUTE
MENU
CH (])/
([)
POWER
(SELECT LANGUAGE mode)
(EZ SETUP mode)
Control section of main unit
Power/Standby indicator