Sharp VL-WD255U - Manual (Page 93)

78
SmartMedia Card
Features
Card Playback
It is possible to play back and view still images
recorded on a SmartMedia card on the LCD
monitor.
Media Selection switch
SmartMedia Card Features
Playback
Power switch
Operation button
1
Open the LCD monitor and adjust the
angle.
2
Set the Media Selection
switch to CARD.
3
Hold down the Lock button and set the
Power switch to VCR.
• The images recorded on the
SmartMedia card are displayed in a
thumbnail format.
1 0 0 0 0 0 6 -
3
6
2
5
1
4
NORMAL
2 1
Lock button
Total thumbnail pages
4
Press e or r on the Operation button
to move the selection frame to the
desired image.
• Each time you press e or r, the
selection frame moves backward or
forward.
Notes:
• You can display a thumbnail of the previous
(or next) 6 images by pressing e (or r)
when the selection frame is on the image at
the top left (or bottom right).
• Holding down e or r increases the
speed of motion of the selection frame.
3
6
2
5
1
4
1 0 0 0 0 0 3 -
NORMAL
2 1
Selection frame
5
Press y .
• The selected image is displayed in full-
screen.
Available Operations during Full-
screen Display
• You can display the full-screen picture of the
previous or next image by pressing e or r.
• To return to a thumbnail of the images,
press d.
NORMAL 1 0 3 1 0 3 NORMAL
1 0 0 0 0 0 3 - CARD CARD
Note:
• Depending on the amount of data for the
recorded image, the resolution setting indicator
displayed during playback may not match the
resolution setting used during recording.
Page number
Image number