Sony SLV-D950I - Manual (Page 21)

filename[010GET.fm] model name1[SLV-D950G/I] [3-084-915-11 (1) GB]
G
e
tting
Star
ted
21
Presetting channels
filename[Z:\2003 Combo G\3084915111\3084915111SLVD950G\010GET.fm]
If the picture is not clear
If the picture is not clear, you may use the Manual Fine Tuning (MFT) function.
After step 5, press
V/v to select “MFT”. Press B/b to get a clear picture. Then
press ENTER.
Tip
• The DVD-VCR must receive channel information for station names to appear automatically.
Note
• When adjusting MFT, the menu may become difficult to read due to interference from the
picture being received.
Changing/disabling programme positions
9 Press O RETURN, then press SET UP to exit the menu.
After setting the channels, you can change
the programme positions as you like. If any
programme positions are unused or contain
unwanted channels, you can disable them.
You can also change the station names. If the
station names are not displayed, you can
enter them manually.
Changing programme
positions
Before you start…
• Turn on the DVD-VCR and your TV.
• To control the DVD-VCR, set TV /
DVD·VIDEO to DVD·VIDEO on the
remote (page 9).
• Set your TV to the video channel so that
the signal from the player appears on the
TV screen.
• If the DVD player is in play mode, you
cannot display the setup menu. Stop the
DVD playback.
RETURN
SET UP
SET UP
V/v/B/b
ENTER
O RETURN
continued