Sealife DC800 - Manual (Page 34)

Playback Mode
>>
32
Playing back voice memo
A press of the SET button displays [VOICE PLAYBACK] and plays back the
voice memo.
 Voice memo is only available for still images.
NOTE
Protecting Images
Set the data to read-only to prevent images from being erased by mistake.
1. Slide the mode switch to [
].
2. Select the image that you want to protect
with the  /  buttons.
3. Press the MENU button.
4. Select [Protect] with the  /  buttons,
and press the SET button.
5. Select [Single] or [All] with the  / 
buttons, and press the SET button.
6. Select [Set] with the  /  buttons, and
press the SET button.
 Protection is applied to the image and
the camera returns to the playback
mode.
 The protect icon [ ] is displayed
with protected images.
When [All] has been selected, [ ] is
displayed with all the images.
Canceling the Protection
To cancel protection for only one image,
display the image on which you want to
remove the image protection.
1. Select [Protect] with the  /  buttons
from the playback menu, and press the
SET button.
Play
SET:Enter MENU:Exit
Play
SET:Enter MENU:Exit