Sony IPELA SNC-P1 - Manual (Page 51)

A
d
mini
s
tra
ting
t
he
Came
ra
Recording Images in Memory — Image memory setting Menu
51
Periodical recording Tab — Setting
the Periodical recording mode
You can set to record the image file to the built-in
memory periodically.
Periodical recording
Select On when you want to use periodical recording. If
you select Off, the Periodical recording is not executed.
Image file name
Type the file name of the image recorded to the built-in
memory up to 10 alphanumeric, - (hyphen) and _ (under
score).
Note
You cannot send the audio file by using the periodical
recording function.
Suffix
Select a suffix to add to the file name.
None: The recording file name will be the Image file
name.
Date & time: The date & time suffix is added to the
Image file name.
The date/time suffix consists of lower two-digits of
year (2 digits), month (2 digits), date (2 digits), hour
(2 digits), minute (2 digits), second (2 digits), and
consecutive number (2 digits), thus 14-digit number
is added to the file name.
Sequence number: A consecutive number of 10 digits
between 0000000001 and 4294967295 and two fixed
digits 00 is added to the Image file name.
Sequence number clear
Click Clear and the suffix of the sequence number
returns to 1.
Interval
Type the interval at which you want to record an image
in the built-in memory periodically. You can set the hour
(H), minutes (M) and seconds (S) between 1 second and
24 hours (one day).
Note
The actual interval may be longer than the set value,
depending on the image size or the network
environments.
Efective period
Set the period when the periodical recording is effective.
Always: The periodical recording is always effective.
Schedule: You can specify the period when the
periodical recording is effective in the schedule
setting in the other section.
Click Schedule and the setting menu for the effective
period is displayed. (“Setting the Schedule — Schedule
setting Menu” on page 55)
OK/Cancel
See “Buttons common to every setting menu” on page
29.
Folder structure of image memory
When the image memory function is used, the images
are recorded with the following folder structure.
A represents a folder created automatically.
The Date_No. folder has a 9-digit name consisting of the
last two digits of the year (2 digits), month (2 digits), day
(2 digits), underscore and sequence number (2 digits).
In the built-in memory, one folder automatically created
can store image files of about 1 MB. If the size of the
image files exceeds that value, a new folder is created
automatically to continue recording.
About the extension of a file
A file to be recorded/sent using the image memory
function or the FTP client function has one of the
xxxxxxx.m4f
yyyyyyy.m4f
aaaaaaa.jpg
bbbbbbb.jpf
ccccccc.m4f
zzzzzzz.m4f
qqqqqqq.m4f
Root Date_No.
Date_No.