Woodstock REBEL W2000 - Manual (Page 22)

W2000 Rebel ® – 21
Because there are no moving parts, maintenance is vir-
tually eliminated. However, we do make the following
recommendations:
•• Give the table a shot of some type of protec-
tive coating. Many types of machine table
coatings are available on the market today.
These will keep the table surface in prime
condition and reduces friction when feeding
material.
•• Periodically check all bolts and fasteners to
make sure that they are tight.
•• Periodically check the router insert and
ensure that it is flush to The Rebel ® table.
Ensure that the router is firmly mounted to
the router insert.
•• Inspect the router, especially the collet.
Ensure that the collet tightens securely
around the router bit.
V V.. M Maaiin ntteen naan nccee
Any maintenance performed on The Rebel ® should
be only done after the router has been turned off and
the cutter has come to a complete stop and the plug
pulled from the outlet. Failure to do so may result in
serious personal injury.