Sharp Aquos LC 20S4U - Manual (Page 35)

34
Useful Features (Continued)
NO SIGNAL OFF
Power control setting allows you to save energy.
When set to “ENABLE”, the power will automatically shut
down if no signal inputs for 5 minutes.
Press MENU to display the Menu screen.
Press \/| to select “OPTION”.
Press '/" to select “NO SIGNAL OFF”, and press
ENTER.
Press '/" to select “ENABLE”, and press ENTER.
E N A B L E
D I S A B L E
Press MENU to exit.
A
• “DISABLE” is factory preset value.
• This function can work only in TV mode.
• If interfered with by other broadcast or radio waves, “NO SIGNAL
OFF” may not work properly even when the broadcast is over.
NO OPERATION OFF
When set to “ENABLE”, the power will automatically shut
down if there is no operation for 3 hours.
Repeat steps 1 and 2 of NO SIGNAL OFF.
Press '/" to select “NO OPERATION OFF”, and
press ENTER.
Press '/" to select “ENABLE”, and press ENTER.
E N A B L E
D I S A B L E
• 5 minutes before the power shuts down, remaining
time is displayed every minute.
Press MENU to exit.
A
• “DISABLE” is factory preset value.
4
1
1
5
4
3
3
2
PICTURE FLIP
You can set the orientation of the picture.
Setting the PICTURE FLIP on the MENU screen
Repeat steps 1 and 2 of NO SIGNAL OFF.
Press '/" to select “PICTURE FLIP”, and press
ENTER.
Press '/" to select the desired mode, and press
ENTER.
N O R M A L
M I R R O R
R O T A T E R O T A T E
U P S I D E D O W N U P S I D E D O W N
Press MENU to exit.
Directly setting the PICTURE FLIP
Press PIC.FLIP to display the PICTURE FLIP screen.
Press PIC.FLIP to change the setting.
PICTURE FLIP [NORMAL]
PICTURE FLIP [UPSIDE DOWN]
PICTURE FLIP [MIRROR]
PICTURE FLIP [ROTATE]
2 2
1
3
4
2
1
[UPSIDE DOWN]
To display upside down
images for special uses. [ROTATE]
To display rotated images
for special uses.
[MIRROR]
To display mirror images
for special uses. [NORMAL]
Normal image
orientation.
LC-20S4U_E_P32-34.p65 04.12.8, 7:14 PM 34