Connecting the monitor – Siemens S7 User Manual
Page 9
Colour monitor S7
A26361-K877-Z100-4-5E19
English - 7
Installation/Deinstallation of the loudspeaker module
Installation
Ê
Align the loudspeaker module that the two
hooks slot into the two openings on the
bottom of the monitor.
Ê
Engage the loudspeaker module
Deinstallation
Ê
Press the two push-buttons on the rear of
the loudspeaker module and remove it
downward.
Connecting the monitor
Information on the computer connections and interfaces is contained in the operating manual for
your computer.
!
Observe the "Safety" in the chapter "Important notes" in this operating manual.
The thermal dissipation on the rear wall of the casing must not be prevented by shielding.
Therefore, make sure that the distance to the wall or pieces of furniture is long enough.
1
3
2
4
1 = Connector for the power supply
2 = D-SUB connector
3 = Audio IN
4 = Audio IN
Ê
Be sure that the monitor and the computer are switched off.
!
The computer power plug must be pulled out!