Siemens S7 - Manual (Page 15)

Colour monitor S7
A26361-K877-Z100-4-5E19 English - 13
Removing the monitor base
Before you can use a swivel arm or a wall bracket, you must remove the monitor base:
Ê Lay the monitor on its face on a soft surface.
!
The monitor surface is susceptible to scratching!
Ê Push a screwdriver through the opening on
the monitor base.
Ê Push the spring with a screwdriver towards
the hinge and lift off the monitor base.
You can now mount a swivel arm or a wall
bracket as per VESA FPMPMI with 75 mm hole
spacing. For instructions on how to mount the
swivel arm or wall bracket, please see the
documentation for the swivel arm or wall bracket.
!
The thermal dissipation on the rear wall of the casing must not be prevented by shielding.
Therefore, make sure that the distance to the wall or pieces of furniture is long enough.
If you want to mount the monitor base again, hook the monitor base on the rear of the monitor and
press the monitor base towards the rear panel, it clicks into position.