Sanyo VPC-R1E - Manual (Page 84)

Power
supply Battery 4 AA alkaline batteries
also:
4 AA Ni-Cd batteries (Sanyo N-3US)
4 AA Ni-MH batteries (Sanyo HR-3USV)
2 lithium batteries (CR-V3)
œ Manganese batteries cannot be used.
AC adapter
(sold
separately) VAR-G5EX (for VPC-R1EX)
VAR-G5E (for VPC-R1E)
VAR-G5U (for VPC-R1)
Dimensions 121 (W) x 65 (H) x 38 (D) mm
Weight Approx. 180 g (without batteries and card)
Digital Camera Connectors
USB terminal USB connector USB port
DC IN (external DC
power input) terminal DC 7.0 V (for exclusive use with separately sold AC
adapter)
Battery Operation
Shooting 980 images: LCD monitor off, images captured in
20-second intervals, and flash used 1
in 3 times
350 images: LCD monitor on, images captured in
20-second intervals, and flash used 1
in 3 times
Playback 5 h. 30 min.: LCD monitor on, and continuous
playback
œ Until batteries run out when using a 32 MB CompactFlash card
(KA-DSM-C32G) and batteries (fully charged) at a 20°C ambient
temperature.
œ The time of operation may vary depending on the conditions of the
batteries and the conditions of use. Especially when used at temperatures
below 10°C, the battery operation time is drastically reduced.
SPECIFICATIONS
79 English