Sanyo CLT1554 - Manual (Page 8)

Remote Control
CONNECTING A DVD PLAYER OR OTHER EQUIPMENT
Switch off TV and external equipment before connecting cables. (Cables are not supplied.)
1
Connect a DVD Player or other equipment’s Component Video Out to the TV Component Video In (Y-
Pb-Pr) Jacks.
2
Connect the DVD Player’s Audio Out to the TV Component L/R Jacks.
3
Press POWER to turn on the TV. Turn on external equipment also.
4
Press the INPUT key to select COMPONENT3.
DVD Player
USING THE COMPONENT AUDIO/VIDEO INPUT JACKS
TV COMPONENT3
JACKS
TV Back
1
■ A solid Blue screen with COMPONENT3 displayed
means that the Video mode is selected, but no signal is
being detected at the Component jacks. Check connec-
tion, and turn on external equipment. ■ Press the INPUT key after connecting cables to access
the A/V Inputs. There is NO need to tune to a blank
channel.
What you will need
for connections:
1 Component Video
Cable – 1
2 Audio Cable – 1
8 Need help?
Visit our Web site at
www.sanyoctv.com
or Call 1-800-877-5032
2
3
4