Sanyo CLT1554 - Manual (Page 6)

CATV FRANCHISE NOTE: Cable companies, like public
utilities, are franchised by local government authorities. To
receive cable programs, even with equipment which is
capable of receiving cable channels, the consumer must
subscribe to the cable company’s service.
CONNECTING CABLE SERVICE, RF
ANTENNA, OR SATELLITE RECEIVER
TO THE TV
Cable Service
RF Antenna
Satellite Receiver
TV Back
INSTALLING BATTERIES IN THE REMOTE
CONTROL
Use 2 “AAA” batteries (Not supplied).
Be sure batteries are installed correctly.
Note: Do not mix old batteries with new ones or mix different types of
batteries together.
VCR Back
GETTING STARTED
Operational Tip for No
Signal Connection:
If the TV is used as a monitor only,
with a DVD player or some other type
of external equipment, and no cable or
antenna signal is available, the follow-
ing setup is necessary:
Your TV is designed to automatically
search for available channels. There-
fore, the initial start up requires that
you press the MENU key, enabling
the TV to automatically go through
the channel search process before you
can operate the TV. After the initial
channel search is completed, you must
press the MENU key again to com-
plete the channel search process. This
may take several minutes.
After the channel search process is
complete (2 searches), you can press
the INPUT key on the remote control
to use the TV as a monitor.
■ TV will automatically select the correct Antenna mode
for the type of Analog RF signal connected automatically.
Use “Antenna Selection” in the Setup menu to change the
Antenna Mode.
■ TV will switch off automatically after 15 minutes if there is
no signal reception (cable out or station not broadcasting).
Exception—When the Video mode is selected, the TV will
not automatically switch off when signal reception has
stopped for 15 minutes.
■ If you move the TV to a new location, press the RESET key
twice after connecting the signal and turning on the TV.
6 Need help?
Visit our Web site at
www.sanyoctv.com
or Call 1-800-877-5032