Multi control, Direct functions – Samsung 460DX User Manual

Page 72

S-Video

Component

HDMI

Multi Control

Assigns an individual ID to the SET.

1) ID Setup

[MENU] → [∧ / ∨] → [ENTER] → [∧ / ∨] → [ENTER] → [ENTER] → [0~9]
Assigns distinctive IDs to the SET.

2) ID Input

[MENU] → [∧ / ∨] → [ENTER] → [∧ / ∨] → [ENTER] → [ENTER] → [0~9]
Use to select the transmitter functions of the individual SET. Only a SET where the ID corresponds to the
transmitter setting becomes activated.

Direct Functions

Available Modes

PC / BNC / DVI

S-Video

Component

HDMI

MDC

Moves to the Multi Control OSD screen.

LOCK

Sets the Safety Lock function.

1) Lock On

It will be locked.

2) Lock Off

It will be unlocked.

Note

• When setting the Lock function, you can only operate the power and lock buttons on the remote control

and set.

The preset password on the LCD Display is "0000".

Note

• Resetting the password for the function key lock.

Press MUTE → 1 → 8 → 6 → On. The password will be reset to '0000'.

The remote control is required for

resetting the password.