Star Trac SPINNING 727-0083 - Manual (Page 24)

21
Time required:
15 Minutes
Parts required:
727-0083 Spinning® Computer Kit
Note: The inserts and mounting
bracket are not used on the
Elite 6900 or NXT 7000.
Tools required:
M5 Allen Wrench
M2 Allen Wrench
1. Install the mounting bracket to the center flat
section of the handlebar by slightly prying the
computer bracket clamp open.
2. Secure clamp down by tightening the M6x20 screw
and M6 nut.
Mounting Computer On Handlebars - Elite 6900 and NXT 7000