Star Micronics Star SP317 - Manual (Page 59)

– 57 –
APPENDIX
Print speed: Approx. 5.53 lines per sec.
Line spacing: 1/6-inch (initial setting), 1/8-inch, 1/12-inch,
n/72-inch, n/144-inch
Paper feed method: Friction feed
Paper feed speed: Approx. 3 inches/sec.
Paper specifications
Paper type: Ordinary bond and carbonless copy paper
Paper width: 82.5 ±0.5 mm (3.25 inches)
76 ±0.5 mm (3.0 inches)
57.2 ±0.5 mm (2.25 inches)
Roll diameter: 85 mm (3.35 inches) max.
Thickness (single) 0.07 mm to 0.10 mm
(copies) Original + 1 copy (Max. 0.14 mm)
Original + 2 copies (Max. 0.2 mm)
However, paper that can be cut with the auto
cutter is one sheet of 0.06 – 0.085 mm
thickness.
Internal diameter of roll: 12 ±1 mm
Note: The paper must not be glued to the core.
Ink ribbon specifications
Ribbon type: Cartridge cassette
Color: Standard purple or optional black
Ribbon material: Nylon (#40 denier)
Ribbon life: Purple (standard) 6,000,000 characters
Black (option) 1,600,000 characters
Interface:
Serial interface: RS-232C serial interface (standard)
20 mA current loop (option)
RS-422A (option)
Parallel interface: Centronics compatible
Data buffer: Selectable between 1 K and 256 bytes
Peripheral unit drive circuit: 2 circuits (24 V, max. 1 A with a 1 circuit
compulsion switch)
Power Supply: AC120 V ±10 % 60 Hz (for US)
AC230 V –10 % ~ 240 V +10 % 50/60 Hz
(for EU)
AC220 V ±10 % 50/60 Hz (for Hong Kong,
Korea)