2. sp347 – Star Micronics Star SP317 User Manual

Page 5

– 3 –

1-2. SP347

3 Lift up the auto cutter and put it in a

vertical position, as shown in Fig. 1-
4.

4 Remove the packing material.

Fig. 1-3 Removing the front cover

(SP347)

Fig. 1-4 Raise the auto cutter and remove

the packing material (SP347)

1 Turn the power switch on the printer

to the off position.

2 To remove the front cover lift it up

approx. 3cm. and pull it forward.
NOTE: Do not touch the print head

immediately after printing
as it can be extremely hot.

Auto cutter

Packing material

ENGLISH

Front cover

Power off