Sagem my501Ci - Manual (Page 34)

34 Settings
USB Mode
This menu allows you to select a mode to connect the phone to a peripheral with the USB cable available as an accessory.
- At plugging-in: if you select this option, when connecting a USB cable, the phone asks you to select the mode you want.
- Modem: to exchange data between the phone memory and a PC.
- Pictbridge: to connect the phone to a printer (printing photos) without using a PC.
- USB key: to exchange data between the memory card inserted in the phone and a PC.
Notes when the phone is connected to a personal computer in USB key mode:
- The memory card is not detected by the phone. Consequently, if you have configured your phone with a wallpaper or a
ring tone stored in the memory card, those ones will not be used during the connections.
- Camera is not available, neither in photo mode, nor in video mode.
SyncML
You can synchronize your phonebook, your organizer or your ToDos with your archives stored in your operator’s network
depending on the options offered by your operator.
You have only to activate Bluetooth or configure your USB connection in your phone.
Phone
Silent mode
This menu allows you to switch to Silent mode.
Silent mode can also be accessed via the idle screen by holding down the
key.
When the phone is in silent mode, this relevant icon appears on the idle screen.
In this mode, the ring tone will not function, except for the alarm clock.
Note: if you have activated the silent mode, it does not remain after switching off your phone.
Ring tones
This menu allows you to allocate a ring tone to different functions (call receiving, message receiving, alarm).
Vibrate
This menu allows you to activate the vibrate mode for calls.
252786126_my501Ci_en.book Page 34 Mardi, 25. juillet 2006 3:00 15