Sony SRX-R210 - Manual (Page 11)

Screen Management System – LSM-100
11
Supported Functions
Screen Management Functions:
• Content ingest/registration and content management
• KDM registration and key management
• Show Play List (SPL) management
• Show schedule management
• Playback control
• Execution of SPLs
• Device configuration
• Device monitoring
• Auditorium setup
• Status monitoring: collect status information from projector,
Media Block, RAID and Cavity Security System; report status
at pre-configured intervals
• Log retrieval: including log filtering and secondary log
distribution
• Automation system interface
• Interface (XML/HTTPS) to external TMS system
Security Functions:
• Monitoring of cavity security sensors
• Notifying Media Block LMT-100 and CSS of cavity sensor events
• Responding to security queries made by Media Block LMT-100
• Keeping diagnostic logs of security events
Power Management Functions:
• Status monitoring: monitor status of RAID during power-up
sequence
• IP traffic monitoring: listen for IP messages from UPS signaling
abnormal power and UPS battery conditions
• IO monitoring: monitor power state change requests via
projectionist terminals
• Controls the enclosure power lamp to show current power status
• Sequence power provided to component devices during
power-up and power-down transitions, both user-requested
and unplanned utility outages
• Control UPS during unplanned utility outages
• Initiate standby/shutdown sequences for SRX projector, Media
Terminal, SMS Server, UPS
• Initiate startup/power-on sequences for UPS, RAID, Media
Terminal, SMS Server
• Provides GUIs with status indication
Enclosure Status Light Management Functions:
• Monitors and aggregates status of all system components
using SMS API
• Sends aggregated status information to the status light of the
enclosure
The LSM-100 Screen Management System is a
software application that controls components
including: SMS (Screen Management System)
servers, SMS controllers, projectionist terminals, CSS
(Cavity Security system) servers, power equipment
and status lights. For these controls, a variety of
functions are provided. It also provides seamless
integration with other systems in the theatre such
as the Theatre Management System and the audi-
torium automation system. The LSM-100 satisfies the
requirements of DCI Specifications version 1.0 for
screen management and security.
Projectionists’ Terminal
The SRX-R220 and SRX-R210 projection systems support
projectionists control via a colour touch-screen mounted on the
rear of the projector. The Projectionist Terminal gives uncluttered
access to the essential operations required to run a show as well
as monitoring the status of elements within the projection system.