Sanyo PLC-WXU30 - Manual (Page 80)

80
Appendix
Write down the PIN code number in the column below and keep it with this manual securely. If you forgot or lost
the number and unable to operate the projector, contact the service station.
PIN Code Number Memo
Factory default set No: 1 2 3 4*
Factory default set No: 4 3 2 1*
Put the label below (supplied) on in a prominent place of the
projector's body while it is locked with a PIN code.
While the projector is locked with the PIN code.
PIN Code Lock No .
Logo PIN Code Lock No .
When using the projector ceiling-mounted, put the Lamp
replacement label (supplied) on in a prominent place of
the projector's body to check the Replacement Lamp Type
Number.
Lamp Replacement Label
Lamp Replacement Label
Factory default set No: 1 1 1 1*
*Should the four-digit number be changed,
the factory set number will be invalid.
Alarm PIN Code No .
Put the label below (supplied) on in a prominent place of the
projector’s body while the Antitheft alarm function is set.
While the Antitheft alarm function is set....
Appendix