Protection circuits, Service, Specifications – Soundstream Technologies MC-300 User Manual
Page 7
PROTECTION CIRCUITS
Your amplifier is protected against both overheating and
short circuits. Because of the “soft’ thermal protection (see
the Design Features section on page
it is highly unlikely
that the amplifier will shut off because of thermal overload.
If your amplifier shuts down, turn off the system, wait for a
few moments, and turn the system on again.
SERVICE
Your Soundstream amplifier is protected by a limited war-
ranty. Please read the warranty enclosed with the product.
SPECIFICATIONS
Power output:
1 5 0 w a t t s c o n t i n u o u s p e r c h a n n e l
2 into 4 or ohms, 20 Hz 20
1 5 0 w a t t s c o n t i n u o u s m o n o
into 4 or ohms, 20 Hz 20
75 watts continuous per channel
2 into 2 or 4 ohms, 20 Hz 20
c o n t i n u o u s p e r c h a n n e l
4 into 2 or 4 ohms, 20 Hz 20
Total Harmonic Distortion
20 Hz 20
at full rated power
into 2, 4 or ohms
Signal-to-Noise Ratio
Damping Factor
IHF Dynamic Headroom 3
Maximum Current Draw 45 amps
Idle Current Draw 2.5 amps
Input Sensitivity 250
2.5 V
continuously variable
L
S
E
infinitely variable
Dimensions . . . . . . . . . . . . . . . . . . ...14-l/5” W
H 10” D
with bottom plate
W
H
D
heat sink